juno 60

Loading Instructions:

Tape recorder or computer interface connections; Connect cable from your tape recorders or computer audio interface “output” to the rear “input” on the Juno-60 (LOAD).

1- Set the tape or software program so it will be played back from the very beginning of the data (where you hear a pilot tone).
2- Set The Memory Protect switch on the rear panel of the Juno-60 to OFF.
3- Set the tape recorder/software to PLAY, then press the LOAD button (8) on the Juno-60. The LOAD indicator will light up and the program number display window becomes blank, showing that the data has started. Be sure to press the LOAD button before the modulation tone is heard.

If the load button goes out and the program number display window shows double dashes (–), the loading is complete.

If error message occurs adjust output level on your tape machine. If the output level is too high or too low you will get an error message. Experiment to find the proper level for your equipment. Also make sure to press the load button at the right moment.

Saving Instructions:

Tape recorder or computer interface connections; Connect cable from your Juno-60 “save output” to the “Line input or Mic Input” on the Tape recorder or computer audio interface.

1- Set your tape recorder or software to record mode.
2- Press the SAVE button (#6) of the Juno 60. The save indicator will light up and the program number shown in the display window will go out. Also. the pilot tone will be sent from the SAVE jack.
3- If you tape recorder features the recording volume adjust knob, adjust it so that the pilot tone registers near 0 db. In 4 or 5 seconds the Juno-60 produces a modulated tone, i.e.saving into the tape recorder/software begins. (be sure to complete adjusting the recording level before the modulated tone is heard.

BTW: In case your not already aware of it, we have a cool collection of sounds for your old Juno-60. 112 Patches are available on data cassette or WAV file download. That will get your old Juno back on it’s feet again. More info can be found At The Roland Section Of Our Web Site

KidGlobeSm.gif